Lionballmotor compressor motor is like single temperature and pressure
Single-axis piezoelectric accelerometer installed in the triaxial configuration, and installed in compressor motor, compressor housing, car cooling water pump and condenser fan motor. From 10 Hz to the overall vibration level 20 kHz and two high (0-6000 Hz) and low range (0-600 Hz) spectra acquired from vibration sensors each.Compressor motor current is single-phase motor monitoring and control in the current transformer cabinet. This provides a compressor motor load measures, because the electric motor current consumption is proportional to the workload of the compressor motor is performing. These prototype systems will be upgraded to monitor vehicle and between all three stages of the current phase and differential voltage will allow more detailed analysis of the electrical characteristics. The total current value of the acquired motor and high-resolution motor current spectra for condenser motor.Four of the temperature measurement is: chilled water inlet, discharge and condenser fan motor water inlet and discharge.There are two process pressure measurement: chilled water and cooling water discharge. Each monitor temperature and pressure measurement as a given the value of a single data acquisition cycle and trend analysis and vibration related applications measuring the state of a particular process.Prerotation leaves to monitor the location of use of a string potentiometer attached to the outside of the joint control of compressor motor. Pre-rotating blades like a load on the compressor motor and control of the compressor motor suction side of the throttle. Like single temperature and pressure recorded of condenser motor as a given value of the data acquisition cycle.The news from Ningbo Lionball-motor compressor motor China Manufacturer http://www.lionballmotor.com